Inspection Markers

Inspection Markers

Product Code: T-Series (water based) and D-Series (solvent based)

Crayons and inspection markers are ideal for industrial applications in the tire, rubber, hose, automotive, and other OEM industries. The products have low VOCs and are typically used for inspection and identification purposes.

Dot markers are typically used in tire manufacturing to denote high point, conicity, and pass/fail marks. The dots help to ensure synchronization of the tires during the rim assembly process and when mounting a tire. Available in water-based or solvent-based, dot markers are applied by hand or installed in a balancing/uniformity machine.

Dot markers are available in three sizes:

Small: 5-8mm
Standard: 10-13mm
Extra Large: 18-23mm

  • Product Description
Our technical advice – whether verbal, in writing or by way of trials – is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore, entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods delivered by us and used by you. We will, of course, provide products of consistent quality within the scope of our General Conditions of Sale and Delivery.

 

Disclaimer / Conditions

We strive to be accurate in all of our documentation. However, any information or advice is provided by us in good faith, without warranty or unlimited claim of fitness for a specific application. We sell to qualified industrial users only. The onus is on the product's user to research carefully and then to continually test the product and its application procedures within the context of its specific use. Use of our products and data requires diligance and care, and is within the sole responsibility of the user. Kautschuk-Group does not accept any liability for damages incurred. Our general Terms and Conditions apply.

Stated storage and shelf life times are minimum guaranteed values for a period starting on the day of shipment. After this period has expired, the product requires additional quality control testing but may very well still be within specification. For more information, refer to our Shelf Life Policy.

Write us now to request information

GET FREE QUOTES
Website created by DSI Design