Tire & Rubber Lubricants

Product Code: isogran-Tire-Rubber-Lubricants

APV’s wide range of solvent-based and water-based mold release agents, mandrel lubes, and other anti-stick coatings fit just about every need. We manufacture effective, economically smart, and environmentally safe mold release agents that will work at a wide range of curing temperatures. These high tech release agents and lubricants have consistently proven to offer a superior mold release performance on a broad variety of surfaces.

  • Product Description

Inside Tire


APV’s inside tire lubricants are specifically formulated to provide excellent release from a tire mold while promoting rubber flow and air bleed. Our tire lubricants are available in solvent-based or water-based formulations. APV also offers both reactive and non-reactive lubricants to meet your requirements.

Our water-based, mica-free inside lubricant will turn clear after curing. This lubricant provides superior air bleed and flow.

Mold Release

PRODUCT CODE: Q-0020 and Q-0080

Mold release lubricants are typically applied directly to a mold used to cure rubber parts in tire manufacturing. Formulations are available in curable or non-curable chemistries. Based on your application, choose curable (Q-0020) for a semi-permanent coating or non-curable (Q-0080) for use as a multi-release mold lubricant.

These lubricants have exceptional non-stick properties. They also improve the rubber flow of the part, as well as prevent lights or non-fills.

Mandrel & Pan

PRODUCT CODE: Q-0024 & Q-0043

APV offers a complete line of solvent-based and water-based lubricants for both bent and rigid mandrels for hose, automotive, and rubber part manufacturing industries. These lubricants provide superior anti-stick properties with no residue or contamination. They also improve rubber flow.

Custom formulations are also available.

Our technical advice – whether verbal, in writing or by way of trials – is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore, entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods delivered by us and used by you. We will, of course, provide products of consistent quality within the scope of our General Conditions of Sale and Delivery.


Disclaimer / Conditions

We strive to be accurate in all of our documentation. However, any information or advice is provided by us in good faith, without warranty or unlimited claim of fitness for a specific application. We sell to qualified industrial users only. The onus is on the product's user to research carefully and then to continually test the product and its application procedures within the context of its specific use. Use of our products and data requires diligance and care, and is within the sole responsibility of the user. Kautschuk-Group does not accept any liability for damages incurred. Our general Terms and Conditions apply.

Stated storage and shelf life times are minimum guaranteed values for a period starting on the day of shipment. After this period has expired, the product requires additional quality control testing but may very well still be within specification. For more information, refer to our Shelf Life Policy.

Write us now to request information

Website created by DSI Design