Product Code: N-9935

This product can be utilized on two components of the tire, treads or splices. Manufacturers spray or gravure apply a thin film of the cement to the underside of extruded treads and again on the splice (or skive) areas. An ideal replacement to liberally- applied solvent-based cements, high adhesion performance is achieved with a minimal amount of this product. When coated, the cured tread will show above average adhesion to most compounds, while leaving no air spaces/voids.

Ideal for retread manufacturers, N-9935 has proven long-term success and cost saving advantages when adhering new tread compound to salvaged tire carcasses.

When spray applying this cement, APV recommends a finely atomized air/fluid spray gun for optimum coverage and film thickness.

  • Product Description

Our technical advice – whether verbal, in writing or by way of trials – is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore, entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods delivered by us and used by you. We will, of course, provide products of consistent quality within the scope of our General Conditions of Sale and Delivery.

Disclaimer / Conditions

We strive to be accurate in all of our documentation. However, any information or advice is provided by us in good faith, without warranty or unlimited claim of fitness for a specific application. We sell to qualified industrial users only. The onus is on the product's user to research carefully and then to continually test the product and its application procedures within the context of its specific use. Use of our products and data requires diligance and care, and is within the sole responsibility of the user. Kautschuk-Group does not accept any liability for damages incurred. Our general Terms and Conditions apply.

Stated storage and shelf life times are minimum guaranteed values for a period starting on the day of shipment. After this period has expired, the product requires additional quality control testing but may very well still be within specification. For more information, refer to our Shelf Life Policy.

Write us now to request information

Website created by DSI Design